A full set of brúsny stroj na rezanie vodným lúčom includes work table, CNC controller, High pressure system with cooling system, Auto abrasive feeder, Water treatment and Sludge Removal System, etc.
Waterjet can cut almost every thing, including: stainless steel, hard tool steel, mild steel, aluminium, brass, bronze, titanium, tungsten steel, zirconia, glass, plexiglass, rubber, ceramic,marble, granite, etc.
Teenking 5 Axis Waterjet
It is a 5-axis motion. With 2 rotating axis, 3D waterjet can cut at fixed or varying angle on 2D or 3D worksheet surface.
Teenking 3D waterjet is most popularly applied in extensive processing industries, handling all kinds of complicated cutting cases easily, such as vertical cut, tiltling cut and cut on 3D part surface, etc. With dynamic compensation, 3D head offsets the natural taper of jet to ensure the exact cutting effect and high accuracy.
a) Dynamic vertical cut compensating,
b) Beveling cut within ±60º(extendable to ±90º),
c) Cut with varying angle (within ±60º) on 2D and 3D part surface (extendable to ±90º)
Why Teenking 3D waterjet?
a) Prime Patented Design with excellent sealing, expending service life of cutting head
b) Harmonic drive inside(no backlash), decreasing maintenance cost in future
c) Infinite C axis rotation, avoiding travel limit in processing
d) Water/dust proof: lp64, ensure good working state of cutting head
DY tilting head
DY head can cut at a fixed tilting angle on the
planeof worksheet, following internal or external contourline. It can also cut at varying angles,
max tilting upto +/-7 degree with extremely high accuracy.Especially suitable for high-precision metal processingand high-end ceramic or stone parquet, etc.
a)Compensated vertical cutting
b)Tilting cutting within +/-8 degree
DYB beveling head
DYB head can cut at a fixed tilting angle on the plane of worksheet, following internal or external contour line. It can also cut at varying angles, max tilting up to +/-14 degree. It’s mainly applied in ceramic and stone parquet cutting. The head can tilt +/-15 degree, cutting sharp corner without arc. Cutting bottom is minimized to leave space for parquet glue, and surface is seamless. It’s the best choice for parquet cutting, cutting with full speed but to keep perfect workpiece surface.
a)Dynamic vertical cut compensating
b)Tilting cut within +/-15 degree
|Max. cutting pressure||420MPa/60000psi|
|Continuous working pressure||350-380MPa/50000-55000psi|
|Max. flow rate||3.6L/min / 7.0L/min|
|Nonimal power||37KW/50HP 75KW/100HP|
|Zdroj||380V/50Hz, 3 Phases|
|1. Imported original intensifier and accumulator assembly are specially adapted to ensure system stability and service life.|
|2. With effective fan-oil cooling system, oil temperature is strictly control to not over 60 degrees Celsius, guaranteeing life of sealing elements.|
|3. Various Instruments monitor data of temperature, pressure and running.|
|4. Auto dual pressure (low/high range 70~380MPa) pressure control system enables automatic low/high pressure switching when cutting, decreasing damages to work pieces.|
|Available cutting area (mm) (For more size, please contact us freely.)|
Max speed in X,Y axis
20 m / min
|Max speed in Z axis||3m/min|
Position in X,Y axis
≤+/-0.05mm per 300mm
≤+/-0.02mm/ full range
Machine Type: Glass Cutting Machine
Production Capacity: 10 sets/month
Záruka: 18 mesiacov
Poskytuje popredajný servis: Inžinieri sú k dispozícii pre servis strojov v zámorí
Type: Gantry structure
Max. cutting size: 2000x1500mm
Max. cutting thickness: 200mm
Max. cutting speed: 10m/min
Cutting Accuracy: 0.05mm
Re-position precision: ±0.02 mm
Max. pressure: 420mpa
Application: Cut glass, plastic, ceramic, stone and metal,etc
Packing size: 4.7x2.3x2.2 m
Total weight: 4200KG